Underwater Burning Norfolk

Underwater Burning Norfolk

You have a lot of courses to choose from when it comes to commercial diving, and one of which is underwater cutting or underwater burning in Norfolk. This career path is one of the most exciting and interesting courses in the industry, as you’ll help with the development, maintenance, and repair of underwater infrastructures.

With that said, if you want to learn how to do underwater burning in Norfolk, you should be aware of the different techniques commonly used. Keep in mind that these methods for underwater burning in Norfolk should be done with caution and awareness. Here are a few of them:

Float Technique of Underwater Burning in Norfolk

This method of underwater burning in Norfolk is good for cutting materials with poor electrical contact such as corroded steel, and is useful for burning a wide kerf. This works well when using Broco rods.

In this approach of underwater burning in Norfolk, you have to pull the Broco rod across your work surface lightly while maintaining electrical contact. This technique of underwater burning in Norfolk will help you feel the movement on the tip of the rod, as it allows slower travel speed.

Drag Technique of Underwater Burning in Norfolk

This method is good for cutting mud, cement, and thin or corroded steel. This technique of underwater burning in Norfolk is best done with the use of Broco rods, too.

If you choose to do this technique of underwater burning in Norfolk, you have to manipulate the rod tip to open up the kerf and release gasses and slag. This method of underwater burning in Norfolk requires you to angle the rod away from the direction of the burn while slowly dragging it— useful for burning flood holes.

Push and Run Technique of Underwater Burning in Norfolk

This is the most recommended approach when it comes to underwater burning in Norfolk. And it’s because it can produce the most efficient burn with excellent cut appearance. However, before doing this, it’s important to note that you should have an advanced level of skill in order to properly do this method of underwater burning in Norfolk.

When performing this technique of underwater burning in Norfolk, it’s best to do it with Tuff Cote rods. However, with proper setup, you can use Broco rods as well.

In this approach of underwater burning in Norfolk, you have to slide the burning rod across the work surface while maintaining a consistent angle, pressure, and travel speed. You should also note that when done right, this method of underwater burning in Norfolk should produce a constant ripping sound.

Black Water Technique of Underwater Burning in Norfolk

Like the other techniques for underwater burning in Norfolk, this uses Broco rods as well. However, to properly execute this method of underwater burning in Norfolk, you have to use rod stubs to mark the place you‘ve cut. After that, you have to place a new rod at the stop of the previous burn and let the gasses flow out before making it hot.

Steep Angle Push Technique of Underwater Burning in Norfolk

In this approach of underwater burning in Norfolk, you’ll need good control of the rod’s tip. You can use this method of underwater burning in Norfolk if you’re going to cut thin and corroded steel.

To do this properly, you have to hold the rod at a steep angle. Make sure that it’s at least 30 to 45 degrees. After that, directly push it towards the direction of the burn.

Learn More Techniques of Underwater Burning in Norfolk With Us

If you want to know more methods on how you can safely do underwater burning, contact us at the International Diving Institute. We offer a comprehensive course on underwater burning for Norfolk residents. We make sure that you’ll learn how to properly do the process without compromising your safety. Reach out to us today and master all the approaches used for underwater burning in Norfolk.

See the World Underwater Like Never Before

Marine construction covers a variety of career paths and work than most people assume. Numerous skill sets are required to be certified for the field. However, working as a commercial diver isn’t like any other job in several aspects. To qualify for one, you need to be prepared to enter into an environment different for most workers—underwater.

Take the Plunge, the IDI Way

Aspiring for a career in commercial diving requires not only passion and initiative, but also skills to prepare you for your first plunge into the water. The International Diving Institute aims to provide students with comprehensive training that meets industry standards. With the technical skills and professional qualities you’ll be equipped with, you can guarantee a career outside the walls of the institute.

At IDI, we keep no more than 15 people per class to give more personal and hands-on training for each student. You’ll be able to train for over 30 hours underwater as part of our Commercial Diving Program. This curriculum allows you to enhance your skills and capabilities required in the industry.

Everything you do at IDI prepares you for advancement in the commercial diving industry. From classroom lectures to field tasks, all of them are designed for real-life applications. The instructors you’ll be meeting can provide you with insight and hands-on training honed by their years of experience in the industry.

A Challenging and Adventurous Career Path for You

If you want to pursue a career in marine construction, IDI is the best place to start. Explore all the courses we have to offer below!

Air/Mixed Gas Surface Supplied Diving

Train for marine construction and perform inspection, maintenance, repair, and installation of various underwater infrastructures.

DCBC Unrestricted Diving

Learn through classroom lectures and practical exercises to become a certified unrestricted surface-supplied commercial diver.

Underwater Welding

Become fully-prepared to take a Lloyd’s Register Underwater Welder certification exam through this training.


Train for both general and commercial diving purposes using land-based and underwater principles.

ROV Pilot and Technician

Learn to remotely operate a craft or vehicle through 30 hours of practical hydraulics and other required training exercises.

Underwater Burning

Learn to burn virtually all metals and other materials with the Broco Underwater Ultrahemic System.

Train in a Real-World Environment

Known for its rich diving history, Old Charleston Navy Base is home to all the classrooms and facilities of IDI. The place serves as an advantage as well as an opportunity for all aspiring commercial divers as they can train in a real-world environment.

We give our students access to yards and docks previously used by the Navy, allowing them to train in the same environment as professional divers and welders. Additionally, we have facilities that include freshwater tanks used for the different training needs of our pupils.

Building a Community of Divers

For us, pursuing a career in commercial diving doesn’t mean you’re only constricted inside the four walls of a classroom or at the training site. At IDI, there’s more to attending lectures and training. We can also provide you with an upscale, comfortable place for you and your fellow students to live in while training.

The student apartments we offer at Charleston, SC come with fully-furnished facilities, such as bed and bathrooms, and appliances, including gas stoves, washers, and dryers. There’s also a fitness center where you can keep yourself in shape and physically active when you don’t have training.

Aside from its location near the ocean, Charleston, SC also boasts numerous entertainment options that attract students and tourists from various places. This makes the area perfect both for training and maintaining your social life.

Take the First Dive With the International Diving Institute

Choosing the right commercial diving school is the first step you can take to achieve your dream. And the International Diving Institute will lead you through all the succeeding stages you need to reach that goal.

Are you ready to dive in? Get in touch with us now at admissions@idicharleston.edu. You can also give us a call at (843) 740-1124, and we’ll be there to assist and provide the information you need.


Please note

  • The International Diving Institute is permanently closed.   The final class completed August 26, 2021
  • Please note for transcript and/or education verification inquiries please contact the South Carolina Commission on Higher Education at 803-737-2260 or visit www.che.sc.gov